Lever Type Medium-solid Four-jaw Double-acting Feeding Chuck For Laser Cutting
This product is specially designed for laser pipe cutting units.The product itself can be used as an independent rotating spindle,with a chuck in the middle that can clamp a workpiece tightly and rotate at the same time.Rotating air intake is achieved by the rear-mounted rotator so as to achieve fast clampling and loosening actions.The gas source is the principle of continuous air supply when the chuck works.
The clamping force of the product is large,the clamping force is stable,the adjustment is convenient,the efficiency is high,the rigidity is higher than the long clamping claw,the precision can be maintanied for a long time, and there is no phenomenon that the bending deformation of the clamping claw effects the rotary precision;the design length of the clamping claw is short,and the maximum clamping force does not cause the phenomenon that the long clamping claw horn,which causes slippery,does not occur,and the clamping is unstable;the chuck is simple in structure,light in weight,small in rotational inertia and low in energy consumption.
| Model | Jaw stroke(mm) | Maximum clamping force(KN) | Allowable pressure(Mpa) | Limit speed(r/min) | Clamping range(mm) | Central height(mm) | Rotational inertia(kg.㎡) | Rotating part weight(kg) | Whole unit weight(kg) |
| W110J | 20 | 3.2 | 0.3-1.0 | 500 | Φ4-Φ100 | 110 | 0.3 | 19.8 | 30 |
| W165J | 33 | 4.3 | 0.3-1.0 | 500 | Φ10-Φ165 | 175 | 0.3 | 69 | 95 |
| W220J | 70 | 4.4 | 0.3-1.0 | 500 | Φ10-Φ210 | 200 | 0.7 | 102 | 140 |
| W300J | 86 | 9.8 | 0.3-1.0 | 500 | Φ10-Φ314 | 250 | 2.2 | 145 | 175 |
WORK SHOP:
WHY CHOOSE LINGMAN:
A: Professional Factory:
We have 20year special experience in manufacturing& exporting gears.Our imporoved and advanced enquipment and owned skilled technician so ensure you best quality and definitely with our best factory competitive price.
B:Good material and Quality:
Since we are honest factory,we expect and look forward long cooperation,So material and quality we paid high attention. And for quality we usually checkout during the production twice to control the quality,and we can also test on machine
C.Technicial support:
We can revise size as your request to meet your machine.
D.Best services:
We do best effort we can to our customers.
Product Tags:
|
|
Lever Type Medium-solid Four-jaw Double-acting Feeding Chuck For Laser Cutting Images
|
